Canon MVX460 Instruction Manual page 42

3. Connect the stereo video cable to the camcorder's AV terminal and the
terminals on the SCART Adapter.
Connect the white plug to the white AUDIO terminal L (left), the red plug to the red
AUDIO terminal R (right) and the yellow plug to the yellow VIDEO terminal.
4. If connecting to a TV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
The supplied PC-A10 SCART Adapter is for output only. For analog line-in
recording or analog-digital conversion, please use a SCART Adapter with input
capability (commercially available).
TVs without SCART terminal
Refer also to the TV or VCR instruction manual.
Open the
terminal cover
1. Turn off all devices before starting the connections.
2. Connect the stereo video cable to the camcorder's AV terminal and the
audio terminals on the TV/VCR.
Connect the white plug to the white AUDIO terminal L (left), the red plug to the red
AUDIO terminal R (right) and the yellow plug to the yellow VIDEO terminal.
3. If connecting to a TV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
We recommend powering the camcorder from a household power source.
When the stereo video cable is connected to the AV terminal, the speaker
sound will be muted.
Downloaded From VideoCamera-Manual.com Manuals
42
Signal flow
STV-250N Stereo Video Cable
(supplied)
INPUT
VIDEO
AUDIO
L
R