Dv Dubbing - Canon MVX460 Instruction Manual

You can input video from other digital video devices via the DV terminal, and record the
input video on the tape in the camcorder. You can also record the input video as a movie
or still image on a memory card.
Connecting
Check the type and orientation of the DV terminal and make sure you connect the DV
cable properly. Refer also to the instruction manual of the connected device.
Digital video device
(e.g. camcorder)
Output
Dubbing
Available only in the
1. Load a blank cassette in this camcorder.
If "AV DV" is displayed, change the setting (
2. Connected device: Load the recorded cassette or disc.
3. Open the FUNC. menu, select (
press (
4. Select (
5. Connected Device: Play back the tape or disc.
In record pause mode and during recording, you can check the picture on the screen.
6. If the joystick guide does not appear on
screen, press (
7. Push the joystick (
scene you wish to record appears.
• Recording starts.
• Push the joystick (
8. Push the joystick (
9. Connected Device: Stop playback.
Downloaded From VideoCamera-Manual.com Manuals

DV Dubbing

Signal flow
Commercially available DV cable
mode.
).
) [EXECUTE] and press (
) to display it.
) towards
) towards
) towards
93).
) the record pause icon
) to start the search.
/ when the
/ again to pause/resume the recording.
to stop recording.
Open the LCD panel
and
E
89