Use Wps For Wireless Connection; Set The Router's Pin; Use The Wps Wizard For Wi-Fi Connections - TP-Link Archer C5400 User Manual

Chapter 12
3. Check the box for Enable Airtime
4. Click Save.
¾ To enable the Multi-User MIMO feature
A router with the Multi-User MIMO feature serves 4 devices simultaneously while
a traditional router serves only one user at a time. That means Multi-User MIMO can
provide a faster, more efficient Wi-Fi network for multiusers.
Note:
Devices supporting 5GHz wireless band can enjoy the Multi-User MIMO service.
1. Go to Advanced >
2. Select the wireless network
3. Check the box for Enable Multi-User
4. Click Save.

12. 8. Use WPS for Wireless Connection

Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >

12. 8. 1. Set the Router's PIN

Router's PIN is enabled by default to allow wireless devices to connect to the router
using the PIN. You can use the default one or generate a new one.
Note:
• If you want to enable/disable the WPS feature, go to
the box for Enable WPS.
• PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS
supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router.

12. 8. 2. Use the WPS Wizard for Wi-Fi Connections

1. Select a setup method:
Fairness.
Wireless > Wireless Settings.
5GHz-1 or 5GHz-2.
MIMO.
Wireless > WPS .
Customize Your Network Settings
System Tools > System Parameters > WPS, check or uncheck
80