Table of Contents
Advertisement
11. 7.
Use WPS for Wireless Connection
Wi-Fi Protected Setup(WPS) gives consumers an easier approach to set up a security-protected Wi-Fi connection.
1.
Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2.
Go to
Advanced
>
Wireless
11 7 1
Set the Router's PIN
Router's PIN is enabled by default to allow wireless devices to connect to the router using the PIN. You can use the default
one or generate a new one.
Note:
1.
If you want to enable/disable the WPS feature, go to
box.
2.
PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can
connect to your router with the PIN. The default PIN is labeled on the bottom of the router.
11 7 2
Use the WPS Wizard for Wi-Fi Connections
1.
Select a setup method:
•
Push Button (Recommended): Click the
client device.
•
PIN Code: Enter the client's PIN, and click Connect.
>
WPS
.
System Tools
Connect
>
System Parameters
button on the screen. Within two minutes, push the WPS button on the
> WPS, select or clear the
Enable WPS
check
Advertisement
Table of Contents
