Clearances And Dimensions - Wolf MWD24-2 Service Manual

Drawer microwave
Hide thumbs Also See for MWD24-2:
Table of Contents

Advertisement

Drawer Microwave

Clearances and Dimensions

Dimensions shown on this page must be used. Given
dimensions provide minimum clearance. Locate electri-
cal outlet in the shaded area in the upper left hand cor-
ner of the cutout (See Figures 2-2, 2-3, 2-4 & 2-5).
NOTES:
• The drawer microwave can also be installed using
an electrical outlet in an adjacent cabinet within the
area where the provided electrical cord can reach.
Power cord access hole in cabinet should be a mini-
mum of 11/2"(38mm) diameter hole and de-burred
of all sharp edges.
• Always allow sufficient power cord length to the
electrical outlet to prevent tension.
Contact surface must be solid and level. Pay special
attention to the floor on which the drawer microwave will
sit. The floor of the opening should be constructed of
plywood strong enough to support the weight of the
oven, about 100 pounds (45 kg).
Check location where the drawer microwave will be
installed for proper electrical supply.
Your oven can be built into a cabinet or wall by itself or
under a gas or electric wall oven.
Be sure that the clearance of the floor between the wall
oven and the drawer microwave is a minimum of 2"
(51mm).
The microwave interior will easily accommodate a 9"
(229mm) x 13" (330mm) oblong dish or a bag of
microwave popcorn.
(Models MWD24-2 / MWD30-2)
4-11/16" (119)
1-23/32" (44)
15-13/32"
(391)
Figure 2-2. 24" Drawer Microwave Dimensions
15-13/32"
(391)
Figure 2-3. 30" Drawer Microwave Dimensions
Electrical Outlet
Allow 7/8"(22)
36"(914)
Countertop
Height
Figure 2-4. 24" Drawer Microwave Install
2-3
Installation Information
21-19/32"
(548)
15"(381)
Auto Drawer
Opening
23-7/8"
(606)
28-1/8"
4-11/16" (119)
(714)
2" (51)
15"(381)
Auto Drawer
Opening
29-7/8"(759)
Location
3-1/2"(89)
5"(127)
4"(102)
22-1/8"(562)
Allow
Opening
3/16"(5)
Overlap
Overlap
23-1/2"(597) Depth Min
Allow
7/16"(11)
Overlap
19"(483)
to top of floor
24"(610)
Cabinet Min
Specifications
#813632 - Revision B - December, 2009
14-19/32"
(371)
23-3/8"(594)
1-1/8" (29)
Door Thickness
14-19/32"
(371)
23-3/8"
(594)
1-1/8" (29)
Door Thickness
6"(152)
Anti-Tip Block
14-13/16"(376)
to bottom of
anti-tip block
14-13/16"
(376)
Opening

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mwd30-2

Table of Contents