Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Wolf WD30
Summary of Contents for Wolf WD30
- Page 1 A R M I N G R A W E R NSTALLATION NSTRUCTIONS...
- Page 2 Another footnote we would like to identify is IMPORTANT NOTE: This highlights informa- tion that is especially relevant to a problem- free installation. ® WOLF is a registered trademark of Wolf Appliance Company, LLC...
- Page 3 Both numbers Any required service must be performed by are listed on the rating plate, located on the a Wolf authorized service center. Wolf is not inside of the drawer front. responsible for service required to correct a faulty installation.
- Page 4 Optional stainless steel tubular handles in classic, platinum and carbon stain- less finishes are available as sales accessories. Optional accessories are available through your Wolf dealer. You can also visit our website at wolfappliance.com and click on the accessories section for Model WD30.
- Page 5 " (759) rough opening dimensions and electrical Overall Height " (340) placement for the Wolf warming drawer with S TA I N L E S S S T E E L Overall Depth (behind frame) " (586) stainless steel drawer front.
- Page 6 Check that oven supports do drawer front may be installed below or above not obstruct the interior dimensions required a Wolf 30" (762) single oven, provided the for the warming drawer. warming drawer is fully enclosed, top and...
- Page 7 O P T I O N A L I N S T A L L A T I O N S OVEN ROUGH OPENING The Wolf warming drawer with stainless steel drawer front may be installed in combination OVEN TRIM EXTENDS 5 "...
- Page 8 Minimum Base Support 175 lbs (79 kg) rough opening dimensions and electrical provided with the placement for the Wolf warming drawer with integrated drawer Opening Width " (760) front for detailed integrated drawer front.
- Page 9 It must a Wolf 30" (762) or 36" (914) single oven, A minimum be installed a minimum of 5" (127) above the provided the warming drawer is fully enclosed, 33"...
- Page 10 These instructions is required for clearance of overlaps. When can also be found on the installed above a built-in oven, a minimum of Wolf website, 2" (51) is required. wolfappliance.com. 26" 33" min (660)
- Page 11 O P T I O N A L and microwave for additional specifications. I N S TA L L AT I O N S The Wolf warming drawer with integrated The warming drawer platform must be able to drawer front may be installed in combination support 175 lbs (79 kg).
- Page 12 E L E C T R I C A L R E Q U I R E M E N T S The Wolf warming drawer requires a separate, grounded 120 V AC, 60 Hz power supply and The electrical outlet must be checked by...
- Page 13 I N S TA L L AT I O N I N S T R U C T I O N S C A B I N E T S U P P O R T S I N S TA L L AT I O N P R E P A R A T I O N IMPORTANT NOTE: When the warming Unpack the warming drawer on a flat surface.
- Page 14 W O L F WA R M I N G D R AW E R W A R M I N G D R A W E R I N S TA L L AT I O N Open the warming drawer to its full extension. Drill pilot holes in each corner of the warming An anti-tip block must be installed to drawer through holes in the front face and...
- Page 15 Neither this book nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Wolf Appliance Company, LLC, an affiliate of Sub-Zero Freezer Company, Inc. ©Wolf Appliance Company, LLC all rights reserved.
- Page 16 W O L F A P P L I A N C E C O M PA N Y, L L C P. O. B OX 4 4 8 4 8 M A D I S O N , W I 5 3 7 4 4 8 0 0 - 3 3 2 - 9 5 1 3 W O L FA P P L I A N C E .
Need help?
Do you have a question about the WD30 and is the answer not in the manual?
Questions and answers