Page 1
Wildix W04FXO Media gateway Quick Installation Guide Updated on 23.07.2015...
Page 2
3. Connection to Ethernet 4. Connection to the line 5. Provisioning of the gateway 6. Edit the trunk parameters 7. Reset of the gateway Note: W04FXO are supported starting with WMS version 2.0.16043.9 Wildix W04FXO Media gateway - Quick Installation Guide...
Page 3
LED is OFF indicates that the line is connected and free • 2. Connection to power supply (old models without PoE) Connect the gateway using the power supply and the cable provided with the gateway, as it is shown on the picture. Wildix W04FXO Media gateway - Quick Installation Guide...
Page 4
4. Connection to the line W04FXO gateways have 4 ports on the rear part of the devices, marked as Line1, Line2, Line3, Line4. Connect the needed ports to the analog lines. Wildix W04FXO Media gateway - Quick Installation Guide...
Page 5
• use the paper clip or the object of the similar shape to press the button • keep the button pressed for 5 seconds • when the LED Status turns on, the reset of the gateway is complete Wildix W04FXO Media gateway - Quick Installation Guide...
Need help?
Do you have a question about the W04FXO and is the answer not in the manual?
Questions and answers