Installation; Sfp Transceiver Module - OTS ET1111PpH-S-DR Quick Start Manual

Hardened 1-port 100basetx to 100base-fx or 1000base-t to 1000base-fx sfp media converter with high power poe

ET1111PpH-S-DR/ ET1212PpH-S-DR

Hardened 1-port 100BaseTX to 100Base-FX or 1000Base-T to 1000Base-FX SFP Media Converter with

High Power PoE

Installation

You can select different SFP modules as required (Please refer to our SFP selection list for the appropriate module).

To insert/remove the SFP, the procedures are as follow:

1. On the side panel, insert the SFP module into the

SFP port until it is securely locked.

2. Connect the optical fiber (1/2 core) to the LC connector(s) of the SFP.

3. To remove the SFP module, press down the lock of the LC connector of the optical

fiber to pull out the fiber cable.

4. Pull down the SFP lever and hold its position. Pull out the SFP module from the

SFP port.

Table of Contents

Et1212pph-s-dr