Remote Menu - Sony LMD-2451MD Instructions For Use Manual

Submenu Setting
COMPUTER The appropriate preset memory is set for
DETECT the signal from DVI and HD15 input
connector. Select "PRESET1" for the
standard computer signal. Select
"PRESET2" to "PRESET8" when the
computer signal is not standard (on
page 79).
The preset memory is set for each input
connector of DVI and HD15.
Note
"PRESET7" and "PRESET8" will only
be displayed when "DVI" is selected.
OPTION DVI SETTING
* This settings are displayed only when a BKM-256DD is installed.
USER CONFIG – OPTION DVI SETTING
E X T 5 V ( I N ) :
E X T 5 V ( O U T ) :
E D I D U P D AT E :
E D I D S TAT U S :
Submenu Setting
EXT 5V(IN) Selects ON to output external 5 V
power from the DVI input
connectors and OFF not to output.
EXT 5V(OUT) Selects ON to output external 5 V
power from the DVI output
connectors and OFF not to output.
EDID UPDATE Downloads the EDID information
from the main unit (the monitor) to
the BKM-256DD. Select "START,"
and then press the ENTER button to
start downloading the EDID
information automatically. During
download, "EDID UPDATING..."
is displayed and the CONTROL
button cannot be operated. When
download finishes correctly,
"COMPLETE!" is displayed. When
a fault occurs, "ERROR" is
displayed. Press the RETURN
button to display the on-screen
menu.
EDID STATUS The information downloaded to the
BKM-256DD from the EDID of the
main unit (the monitor) is
displayed.
• MODEL: Model name of the
• SER.: Serial number of the
xx
xx
xxxxx
xxxx
monitor
monitor

REMOTE menu

REMOTE
PA R A L L E L R E M O T E :
S E R I A L R E M O T E :
M O N I T O R :
Submenu Setting
PARALLEL REMOTE Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
pins 1 to 4 and pins 6 to 8. The
following lists the functions you
can assign to the pins.
• – – – ("– – –": No function is
assigned.)
• COMPOSITE
• Y/C
• RGB
• COMPONENT
• DVI
• HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• OVERSCAN
• FULL
• NORMAL
• NATIVE
• 4:3
• 16:9
• TALLY G
• EXT SYNC
• BLUE ONLY
• MONO
• MIRROR IMAGE
Note
If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 78.
SERIAL REMOTE Selects the mode to be used.
• OFF: SERIAL REMOTE does
• RS-232C: The monitor is
• ETHERNET: The monitor is
xxxxxxx
not function.
controlled by the command
of RS-232C.
controlled by the command
of Ethernet.
Adjustment Using the Menus
73