Table of Contents
Advertisement
C
OLOUR MENU
The printer automatically adjusts colour balance and density at
appropriate intervals, optimising the printed output for bright
white paper viewed in natural daylight conditions. The items on
this menu provide a means of changing the default settings for
special or particularly difficult print jobs. Settings revert to their
default values when the next print job is complete.
I
TEM
DENSITY
CONTROL
AUTO DENSITY
COLOUR
TUNING
C HIGHLIGHT
C MID-TONE
C DARK
M HIGHLIGHT
M MID-TONE
M DARK
Y HIGHLIGHT
Y MID-TONE
Y DARK
K HIGHLIGHT
K MID-TONE
K DARK
S
ETTINGS
AUTO
MANUAL
EXECUTE
PRINT PATTERN Selecting this item prints the colour
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
Menu functions> 109
E
XPLANATION
If set to AUTO, image density will be
automatically adjusted at power on,
when a new image drum or toner
cartridge is installed, and at intervals
of 100, 300 and 500 drum counts. If
a 500 drum count interval occurs
during a print job it will occur at the
end of that job, and will take up to
55 seconds. If set to manual, this
adjustment will only be performed
when initiated by the next menu
item.
Selecting this will perform the auto
density set up immediately.
tuning pattern to help you adjust the
colour balance.
Adjusts image density for each
colour component (cyan, magenta,
yellow and black). Normal setting is
0.
Advertisement
Table of Contents
