Table of Contents
Advertisement
6.
From the [Feature Sets] menu (5), select [Colour –
Graphic Pro 1].
5
6
7.
From the [Colour Matching Task] menu (6), select [ICC
Profile Colour Matching].
Use the [Preserve Black] option to keep the original grey
component (K channel) information. If [Preserve Black] is
disabled, the grey components may be printed using a
mixture of CMYK toner, instead of just K (black) toner.
8.
From the [Feature Sets] menu (7), select [Colour –
Graphic Pro 2].
7
8
9
9.
From the [CMYK Profile Type] menu (8), select [CMYK
Input Profile].
10.
From the [CMYK Input Profile source] (9), select the CMYK
Input profile that corresponds to the device you are trying
to match such as a SWOP or Euroscale Press. If you have
another CMYK Ink profile that you wish to use, select it
here as the appropriate "CMYK Source x" profile.
Remember that the names "CMYK Source 1", etc., relate to
the number assigned to the profile using Profile Assistant.
See "Using Profile Assistant" on page 52.
Colour matching> 67
Advertisement
Table of Contents
