Table of Contents
Advertisement
profile using Profile Assistant. See "Using Profile Assistant"
on page 52.
10.
From the [Simulation Target Profile] menu (9), select the
profile of the device you wish to simulate.
Remember that the names "CMYK Source 1", "CMYK
Source 2" and so on relate to the number assigned to the
profile using Profile Assistant. See "Using Profile Assistant"
on page 52.
11.
From the [Feature Sets] menu (10), select [Colour –
Graphic Pro 3].
10
11
12.
From the [Printer Output Profile] menu (11), select your
printer profile.
If [Auto] is selected, the factory default profiles that are
embedded in the printer will be used. If you have created
a printer profile yourself using profile creation software,
select it here and choose a rendering intent (see
"Rendering intents" on page 68).
Colour matching> 63
Advertisement
Table of Contents
