Table of Contents
Advertisement
FX
EMULATION
This menu controls settings effective when the printer is
operating in FX emulation mode.
I
TEM
CHARACTER
PITCH
CHARACTER
SET
SYMBOL SET
LETTER 0
STYLE
ZERO
CHARACTER
LINE PITCH
WHITE PAGE
SKIP
CR FUNCTION CR / CR+LF
LINE LENGTH 80 COLUMN; 136
FORM
LENGTH
TOF
POSITION
LEFT MARGIN 0.0 inch - 1.0 inch
FIT TO
LETTER
TEXT HEIGHT Same; Diff
S
ETTINGS
10 CPI; 12 CPI; 17
CPI; 20 CPI;
PROPORTIONAL
Set 1; Set 2
IBM 437
Disable; Enable
Normal; Slashed
6 LPI; 8 LPI
OFF / ON
COLUMN
11 inch; 11.7 inch;
12 inch
0.0 inch - 1.0 inch
Disable; Enable
Menu functions> 117
E
XPLANATION
Specifies character pitch in this
emulation.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces
9BH with letter o and 9DH with a
zero
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Selects whether blank pages are
printed or not.
Selects whether a received
carriage return character (0Dh)
also causes a line feed.
Specifies the number of characters
per line.
Specifies the length of paper.
Specifies the distance of print from
the top edge of the paper.
Specifies the distance of print from
the left hand edge of the paper.
Sets the printing mode that can fit
print data, equivalent to 11 inches
(66 lines), in the LETTER-size
printable area.
Sets the height of a character.
SAME: Regardless of CPI, same
height.
DIFF: As CPI, character heights
vary.
Advertisement
Table of Contents
