Table of Contents
Advertisement
W
INDOWS
1.
Access the driver's [Properties] window. (See "Changing
the driver defaults" on page 30.)
2.
Select the [Device Options] tab.
3.
In the Windows XP PostScript driver the tab may be called
"Device Settings".
4.
Set the options for any devices you have installed,
including the correct number of paper trays, high capacity
feeder, duplex unit, etc.
5.
Click [OK] to close the window and save your changes.
M
OS X
AC
1.
Open the Printer Setup Utility (OS X 10.3) or Printer
Center (OS X earlier versions), and ensure that your
printer model is selected.
2.
Choose [Printers] → [Show Info] → [Installable Options].
3.
Select all hardware options appropriate to your printer,
and click [Apply Changes].
A Guide to printing> 32
Advertisement
Table of Contents
