Table of Contents
Advertisement
PCL
EMULATION
When you click the Properties button from your application's
Print dialogue, the driver window opens to allow you to specify
your printing preferences for this document.
1.
Paper size should be the
same as the page size of
your document (unless you
wish to scale the printout
to fit another size), and
should also be the same as
the size of paper you will
feed into the printer.
2.
You can choose the source
of the paper to feed, which
may be Tray 1 (the
standard paper tray), Tray 2 (if you have the optional 2nd
paper tray installed) or the multi purpose feeder. You can
also click on the appropriate part of the screen graphic to
select your preferred tray.
3.
A variety of document finishing options can be selected,
such as normal one page per sheet, or N-up (where N can
be any number up to 16) for printing scaled down pages
at more than one page per sheet. Booklet printing prints
two pages per sheet on each side of the paper so that
when folded they make up a booklet. Booklet printing
requires the duplex unit to be installed in your printer.
Poster printing will print large pages as tiles spread over
multiple sheets.
4.
For two-sided printing, you can choose to flip the page by
the long edge or the short edge. Of course, this requires
that a duplex unit be installed in your printer.
5.
If you have changed some printing preferences before and
saved them as a set, you can recall them to avoid having
to set them individually each time you need them.
6.
A single on-screen button restores the default settings.
Printer settings in Windows> 23
1
2
3
4
5
6
Advertisement
Table of Contents
