Back Panel: Functions - EcoxGear GDI-EXEJ300 User Manual

Back Panel: Functions

Master Power Switch
EcoJam has a separate Master Power
Switch and a Standby Button. The switch
MUST be set to the ON position to power
your EcoJam. Once the switch is set to
ON, use the Standby Button
on the top panel to turn the unit On/Off.
NOTE: When not in use for extended
periods, turn the Master Power off to
preserve battery life.
IMPORTANT: Standby Power function
will NOT operate when the Master Power
is set to OFF.
ON
OFF
located
Audio AUX-IN
Connect an audio device using the 3.5mm
cable connection as an alternative to a
Bluetooth connection to your EcoJam.
NOTE: Volume level must be controlled
from the audio device when connected to
the AUX-IN connection.
Input
Connect the USB cable to the USB micro
Input to charge your EcoJam.
RECOMMENDATION: Use the USB cable
included in the box.
NOTE: Charge time from low to full
charge is approximately 3 hours.
While playing audio, EcoJam can be
charged or charge your device. Battery
play time shall be reduced depending on
the time and size of the device charging
while connected to your EcoJam.
CAUTION: Do NOT charge if unit and/or
connections are wet or damp.