Delete Memory - Tecsun PL-365 Operation Manual

TECSUN RADIOS AUSTRALIA
Method 2: MANUALLY STORING STATION
1. Tune to your desired station, press the [MEM.] button
once and notice the PRESET number flashing in the
upper right corner of the display.
2. The station is automatically stored after 3 seconds;
press the [MEM.] button to confirm immediately. If you
prefer to store the station at a different memory position,
rotate the [TUNING] knob to the position of your choice
and press the [MEM.] button to confirm.
Method 3: SEMI-AUTO STATION STORAGE
1. Short press the [VF/VM] button to enter frequency
mode.
2. Long press [VF/VM] button to activate the Auto-browse
function.
During the browsing process, press the [MEM.]
3.
button to store stations into the next available
memory position. The browsing process continues
until you press the [VF/VM] again.

DELETE MEMORY

Method 1: DELETE SINGLE MEMORY MANUALLY
1. Turn the radio on and press the [VF/VM] button until
"Preset" and the memory position appears in the upper
right corner of the display.
2. Rotate the [TUNING] knob to select the stored station
you wish to delete.
3. Press & hold the [DEL.] button until "
the display, press again to confirm.
Note: If "
confirmation, it will exit the delete function automatically.
24/9 Powells Road, Brookvale, NSW 2100 Australia
Email: info@tecsunradios.com.au
" is flashing more than 3 seconds without
10
" flashes on
Ph: +61 2 9939 4377
www.tecsunradios.com.au
M
P
th
m
p
th
s
M
P
e
p
u
d
a
N
to
1
2
N