Table of Contents
Advertisement
TECSUN RADIOS AUSTRALIA
Method 4: AUTO BROWSE MEMORY
1. Turn on the radio to enter memory
mode. Short press the [VF/VM]
button until the memory position
flashes in the upper right corner
and disappears after 3 seconds.
2. Long press the [VF/VM] button
until "Preset" flashes. The
memory is now being browsed,
staying on each stored station for
about 3 seconds.
3. To stop browsing, press the
[VF/VM] button.
Note: Please read the "Working with Memories" section
before using this function.
SINGLE SIDE BAND SSB
1. In any mode, press the [USB/LSB]
button to select SSB reception;
press again to select USB/LSB.
2. Turn the [TUNING] knob to search
stored SSB stations.
3. Press the [BFO] button, when "U" /
"L" flashes on the display, turn the
[TUNING] knob to adjust the
reception.
When it is off, press and hold the [BFO] button to set the
fine tuning step. (P.15)
Exit SSB: Press and hold the [USB/LSB] button to exit.
24/9 Powells Road, Brookvale, NSW 2100 Australia
Email: info@tecsunradios.com.au
SLEEP
Auto-scan memory with
pre-listening
(
)
SSB fine tuning frequency
- " " is for USB.
- "
" is for LSB.
SLEEP
8
flashing
Ph: +61 2 9939 4377
www.tecsunradios.com.au
W
y
ra
S
In
v
In
v
s
T
b
h
W
[F
"
Hide quick links:
Advertisement
Table of Contents
