How To Select Different Memory Page; Delete Memory; Method 1: Delete Single Memory Manually - Tecsun PL-660 Operation Manual

WORKING WITH STATION MEMORIES

HOW TO SELECT DIFFERENT MEMORY PAGE

1. Press the [FM], [MW/LW] or [SW] button
for band selection, then tune into your
desired station.
2. Press the [MEMORY] button with
memory address flashing on the upper right
corner
3. Press the [ - PAGE + ] button to choose
your desired memory PAGE, then rotate
the [TUNING] to select your preference
memory address.
4. Press the [MEMORY] button again to
confirm or wait for 3 seconds to auto store
the station into memory.

DELETE MEMORY

Press the [VF/VM] button with "Memory address" showing on upper right corner of
the display to enter the [Memory] mode, and then follow below methods to delete
those unwanted stations

METHOD 1: DELETE SINGLE MEMORY MANUALLY

Rotate the [TUNING] knob to select the
memory that you want to delete, press &
hold the [DELETE] button with "
flashing; then press the [DELETE] button
to remove the unwanted memory address.
Note:
If " " is flashing more than 3 seconds without confirmation, it will exit the delete
function automatically.
"
-- 15 -- .