Table of Contents
Advertisement
7. First insert the dust filter back into the
dust cup and then close. Press the
unlocking button for the dust cup to engage.
The dust cup must be securely engaged at
the top and bottom of the appliance for it to
work properly.
CLEANING OR REPLACING MOTOR
PROTECTION FILTER
Once you have removed the dust cup, you
will find a piece of non-woven material on
the open side of the appliance. This is the
motor protection filter. It needs to be
cleaned from time to time.
1. Remove the motor
protection filter from the
appliance and shake and tap
off the dust.
2. Rinse with lukewarm water.
3. Then give the motor protection filter a
good shake and leave to dry off completely.
!
CAUTION: Never insert the motor
protection filter while still damp.
4. Check the motor protection filter for
damage and replace with a new one if
necessary.
5. Reinsert the motor protection filter.
TROUBLESHOOTING
If your appliance does not function, is damaged or requires a spare part, please do not make
any repairs yourself for your own safety. The following table contains tips on how to deal with
minor problems yourself:
PROBLEM
No suction action.
The suction capacity is too weak.
Dust escapes from the appliance
during use.
Strange smell
TECHNICAL SPECIFICATIONS
Power supply: ..........................120V 2A
Power consumption:....................240 W
Protection class: .................................II
CLEANING HOUSING
Clean the housing with a slightly damp, soft
cloth if necessary.
STORAGE
• Once you have fitted
the rod handle, you can
wind the cord around the
two cord holders before
putting away.
• To quickly unwind the
cable next time you use
it, twist down the cord
holder on the top handle.
• The vacuum cleaner
should be stored indoors
in a cool, dry place.
CAUSES, SOLUTIONS, TIPS
Check that the power plug is inserted properly in
the wall socket.
• Is the dust cup full? Empty the dust cup.
• Is the dust filter heavily soiled?
Wash the filter and air dry for 24 hours.
• Is the suction opening or nozzle blocked?
Unplug and remove the blockage.
• Is the dust cup full
Empty the dust cup.
• Is the dust filter not been inserted properly?
Press the dust filter firmly into the dust cup so it
fits closely all round the wall of the dust cup.
• Is the dust cup securely fastened to the motor
unit?
When the appliance is used for the first time, it is
normal for it to smell new: this will disappear over
time.
6
Advertisement
Table of Contents
