FITTING THE HARNESS – TPS CABLE :
INSTALLAZIONE DEL CABLAGGIO – SENSORE FARFALLA:
1
1-2 Place the TPS cable (marked TPS) on the right side of the bike, behind the frame pipes (see picture 1) and under the coolant pipe
near the throttle sensor
1-2 Passare il cavo TPS (marcato TPS) dietro ai tubi del telaio e sotto al tubo del refrigerante vicino al sensore farfalla (vedi figura 1):
operare sul lato destro della moto
3
3-4 Disconnect the OEM TPS connector and connect the GET TPS harness
3-4 Disconnettere i connettori originali ed inserire i connettori del cablaggio GET
WHEN KIT INSTALLATION HAS FINISHED PLEASE REMEMBER TO
CALIBRATE THE ZERO TPS POSITION
UNA VOLTA ULTIMATO IL MONTAGGIO DEL KIT ESEGUIRE LA
PROCEDURA DI CALIBRAZIONE DELLO ZERO TPS
2
4
GD-MIP-0011-AD
www.getdata.it
sales@getdata.it