FITTING THE HARNESS – PICK-UP SENSOR :
INSTALLAZIONE DEL CABLAGGIO – SENSORE GIRI MOTORE:
1
3
1-2 Place the pick-up cable (marked SMOT) over the engine head (see picture 1 and 2) and pull it out through the left side of the bike.
Keep it away from spark cable and fix it far from heating sources
3- Disconnect the OEM pick-up connectors and connect them to the GET harness
1-2 Passare il cavo pick-up (marcato SMOT) sopra la testa del motore (vedi figura 1); farlo uscire sul lato sinistro della moto. Tenere il
cavo distante da quello candela e fissarlo lontano da fonti di calore.
3- Connettere i cavi del sensore giri motore a quelli del cablaggio GET
RIGHT SIDE
GD-MIP-0011-AD
2
PICK-UP CONN.
www.getdata.it
sales@getdata.it
LEFT SIDE