Remote Control; Replacing Batteries; Using The Remote - ELECTROCOMPANIET EMC 1 Mark IV Owner's Manual

Remote control

3
COAX1
COAX2
USB
4
7
8
10
11
MENU TOP MENU SETUP

Using the remote

When using the remote control, the front end of the remote control should be pointed to the front
panel of your EMC 1 MKIV. A free line of sight is required between the remote and the infrared sen-
sor on the front panel.
EMC 1_MKIV.indd 7
1
2
AMP
TOS
Link 1
TOS
Link 2
5
6
9
12
S.MODE
1. Standby – Standby mode is indicated by glow-
ing e-logo on top of the player.
2. Numeric controls – Press these buttons to select
a specific track on the disc.
For tracks 10 and above, the second digit of the
number must be pressed within one second
3. Dim - dimming the display and E-logo.
4. Long press Search backwards
5. Long press Search forward
6. Play
7. Stop
8. Pause
9. Next track
10. Previous track
11. Repeat – Press this button once and all the
tracks on the disc will be repeated.
Press the button again, and it will only repeat
the current track. Press one more time to cancel
repeat mode.
12. Shuffle - The tracks will be played in a
random order.

Replacing batteries

Use 2pcs AAA or LR03 batteries.
Observe correct polarization when inserting bat-
teries.Please remove batteries when the remote is
not used for a prolonged period of time.
7
ENG
27.04.2016 16:45:22