Navigator Controls; Rear Panel Connections - ELECTROCOMPANIET EMC 1 Mark IV Owner's Manual

ENG

Navigator controls

1. PLAY button
2. STOP button
3. NEXT TRACK button
4. PREVIOUS TRACK buttons
5. ON/OFF - The power button is used for turning ON and OFF the CD player.
6. INFRARED SENSOR
The infrared sensor will detect commands from the included infrared remote control.
Please make sure that there is a direct line of sight between the infrared sensor and the infrared
remote control.
(See page 7 for more information on using an infrared remote control with your EMC 1 MKIV)

Rear panel connections

1 2 3
Connector
1
2
3
4
5 Power / AC Input
6
7
8
9
EMC 1_MKIV.indd 6
6
Name
XLR output right balanced audio connection
Coax output L/R unbalanced audio connection
XLR output left balanced audio connection
Voltage selector 12V trigger control input
with Fuse
RS-232 home installation / service
Trigger input 12V trigger control input
SPDIF coaxial digital audio output (SPDIF)
Toslink out
5
4 5
Used for
Input power
optical digital output
6
1
4
3
2
6 7 8 9
Connection type/Cable
XLR / balanced audio cable
RCA / unbalanced audio
cable
XLR / balanced audio cable
3,5mm mono mini jack
Supplied power cable
3,5mm mono mini jack
RCA / 75-ohm coaxial cable
Toslink
27.04.2016 16:45:22