Advertisement
Quick Links
Advertisement
Related Manuals for ELECTROCOMPANIET EMC 1UP
Summary of Contents for ELECTROCOMPANIET EMC 1UP
- Page 1 EMC 1UP Owner’s Manual...
- Page 2 emc1up_v1.1_knekkt...
- Page 3 Owner’s Manual EMC 1UP Reference CD Player 24 Bit Upsampler 192kHz DAC Warning: To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture. Verify line voltage before use. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
- Page 4 Welcome to the world of Electrocompaniet We sincerely thank you for selecting an product from Electrocompaniet. We hope you will enjoy years of listening pleasure and true High End musical performance from your audio system. Kindly read this owners manual to familiarize yourself with the set before operation.
- Page 5 For optimal sonic performance, the EMC 1UP should be burned in for a mini- mum time of 72 hours. The easiest way to burn in your EMC 1UP is to put a disc in REPEAT mode with the rest of your system turned off. In daily operation, switch off the CD player by using the STANDBY button on the remote.
- Page 6 How to level the unit 1. For maximum performance, the EMC 1UP should be leveled. 2. Please check your shelf or table first with the enclosed bobble. 3. If outside the inner circle please see if this could be corrected. 4. Check the CD player with enclosed spirit level, if outside the inner circle, a piece of dead material underneath one of the magic foots could be used.
- Page 7 How to avoid noise problems The EMC 1UP contains delicate circuits that are sensitive to magnetic strayfields. The unit should not be place near mains transformers, TVs etc. Care should also be taken regarding placement of the interconnect cables. Do not run interconnect cables in parallel with mains cords and loudspeaker cables.
- Page 8 Connecting the audio components Balanced...
- Page 9 Single ended...
- Page 11 Remote control Single ended STANDBY DISC – No function. SCAN – Play 10 seconds of each track. PROG a. Set the CD player in STOP MODE. b. Select tracks with the numeric buttons (9), or step to the number using buttons no.
-
Page 12: Connecting The Audio Components
The display will go dark. The e- sign on top of the unit will still be lit, indicating Standby mode. When not using the EMC 1UP for a long period, turn the mains switch off and disconnect the unit from the mains outlet. - Page 13 Signal to noise 100 dB -100 dB Frequency response (20 - 20 kHz) 0 dB Output S/PDIF Power consumption 23 W The EMC 1UP has DC coupled analog output Dimensions Width 483 mm inch Depth 450 mm 17.7 inch Height 120 mm...
- Page 14 4.Always ship the unit in its original carton and packaging material to prevent damage in transit. Electrocompaniet will not cover damages incurred in transit. If you require further information concerning the operation of the unit, or if you have any questions related to service, please do not hesitate to contact your dealer or national distributor.
Need help?
Do you have a question about the EMC 1UP and is the answer not in the manual?
Questions and answers