Table of Contents
Advertisement
ENG
Warning:
To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture.
Verify line voltage before use. Do not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personal. The warranty is void if the product is tampered
with by non-authorised personnel. Use only authorized Electrocompaniet service center.
The contents of the carton
• 1 pc.
EMC 1 MKIV Reference CD player
• 1 pc.
AC main cord
• 1 pc.
IR Remote control
• 2 pcs.
Batteries for remote control
• 1 pc.
CD clamp
• 2 pcs.
Allen keys for securing of the Mechanical Cancellation System.
• 1 pc.
Owner's manual
• 1 pc.
Inspection card
Unpacking the EMC 1 MKIV
Immediately upon receipt of the EMC 1 MKIV CD player, inspect the carton for possible
damage during shipment. The carton and packaging have been designed to provide the
safest possible protection for transport of your EMC 1 MKIV. Unpack the unit carefully. Save
all packaging materials for future shipment.
Important Notice
The transport screws must be removed for proper operation. When moving the CD player.
Always re-insert and tighten the transport screws to avoid severe damage to the unit!
For optimal sonic performance, the EMC 1 MKIV should be burned in for a minimum time
of 72 hours. The easiest way to burn in your EMC 1 MKIV is to put a disc in REPEAT mode
with the rest of your system turned off. In daily operation, switch off the CD player by using
the STANDBY button on the remote. Due to high class A operation it is normal for the CD
player to feel warm. Proper ventilation is important. The CD player should by no means be
completely covered. A good rule of thumb is to allow at least 5 - 8 cm (2 - 3 inches) of air
sidewise and above the CD player. Please refer to Owner's Manual for removal of the CD
transport screws.
EMC 1_MKIV.indd 4
4
27.04.2016 16:45:21
Advertisement
Table of Contents
