Remote Control; Replacing Batteries; Using The Remote - ELECTROCOMPANIET EMC 1 Mark III Owner's Manual

Remote control

3
TOS
COAX1
Link 1
TOS
COAX2
Link 2
USB
4
7
8
10
11
12
MENU TOP MENU SETUP

Using the remote

When using the remote control, the front end of the remote control should be pointed to the front panel of your
EMC 1 MK III. A free line of sight is required between the remote and the infrared sensor on the front panel.
1. Standby – Standby mode is indicated by
glowing e-logo on top of the player.
1
2. Numeric controls – Press these buttons to
select a specific track on the disc.
For tracks 10 and above, the second digit
2
of the number must be pressed within one
second
3. Dim - dimming the display and E-logo.
4. Search backwards
AMP
5. Search forward
6. Play
7. Stop
8. Pause
9. Next track
10. Previous track
11. A/B – Repeat a segment of the disc/
track. Press the button once to mark the start
of the portion to be repeated. Press it again
5
at the end of the desired sequence.
The selected area will play continuously until
the STOP (7) button is pressed.
6
12. Repeat – Press this button once and all
9
the tracks on the disc will be repeated.
Press the button again, and it will only repeat
the current track. Press one more time to
cancel repeat mode.
13
13. Shuffle - The tracks will be played in a
S.MODE
14
random order.
14. S.Mode - Changes SACD playback layer.
Select between STEREO and MULTICHANNEL
play back area.

Replacing batteries

Use 2pcs AAA or LR03 batteries.
Observe correct polarization when inserting bat-
teries.Please remove batteries when the remote is
not used for a prolonged period of time.
7
ENG