Important Safety Instructions - ELECTROCOMPANIET EMC 1 Mark IV Owner's Manual

Table of Contents

Advertisement

Precautions
Before connecting the AC power cord to the appliance, make sure the voltage selector switch of the appli-
ance corresponds to the local electrical supply. If you are unsure of your power supply, contact your local
power company. The acceptable power input range is either AC~100V to 120V or AC~220V to 240V
50/60Hz.
The player is still receiving power from the AC power source as long as it is connected to the wall outlet,
even if the player itself has been turned in standby.
Unplug the power cord if you are not going to use the product for an extended period of time. Hold the
power connector when unplugging. Do not pull on the cord.
The power switch is used as the mechanism for cutting off power, therefore make sure it is easy to oper-
ate.
To ensure proper ventilation around this product, do not place this product on a sofa, bed or rug. When
installing this product on a wall or bookshelf, you need to provide appropriate space: we recommend leav-
ing
5 - 8 cm (2 - 3 inches)
High temperature will lead to abnormal operation of this unit. Do not expose this unit or batteries to direct
sunlight or near other heating objects.
Condensation may occur when moving the player from a cold location to a warm one, or vice versa. Should
this occur, the EMC 1 MKIV may not operate properly. In such a case please turn the unit on for 1-2 hours to
facilitate moisture evaporation.

Important Safety Instructions

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this device near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not
install the unit in a small and closed rack or shelf.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other device
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at plug, receptacle, and the point
where it exits from the device.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this device during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the device has been dam-
aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14 ) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine,
fire or the like.
EMC 1_MKIV.indd 3
of free space at the top, the sides and the rear.
3
ENG
27.04.2016 16:45:21

Advertisement

Table of Contents
loading

Table of Contents