Navigator Controls; Rear Panel Connections - ELECTROCOMPANIET EMC 1 Mark III Owner's Manual

ENG

Navigator controls

1. PLAY button
2. STOP button
3. NEXT TRACK button
4. PREVIOUS TRACK buttons
5. ON/OFF - The power button is used for turning ON and OFF the CD player.
6. INFRARED SENSOR
The infrared sensor will detect commands from the included infrared remote control.
Please make sure that there is a direct line of sight between the infrared sensor and the infrared remote control.
(See page 7 for more information on using an infrared remote control with your EMC 1 MK III)

Rear panel connections

1 2 3
Connector
1
2
3
4
5
6
7
8
9
6
Name
XLR output right
Coax output L/R
XLR output left
Voltage selector
Power / AC Input
with Fuse
RS-232
Trigger input
SPDIF coaxial digital audio output (SPDIF)
Toslink out
5
4 5
Used for
balanced audio connection
unbalanced audio connection
balanced audio connection
12V trigger control input
Input power
home installation / service
12V trigger control input
optical digital output
6
1
4
3
2
6 7 8 9
Connection type/Cable
XLR / balanced audio cable
RCA / unbalanced audio cable
XLR / balanced audio cable
3,5mm mono mini jack
Supplied power cable
3,5mm mono mini jack
RCA / 75-ohm coaxial cable
Toslink