Important Notice - ELECTROCOMPANIET EMC 1 MKV Owner's Manual

Warning:
To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture.
Verify line voltage before use. Do not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personal. The warranty is void if the product is tampered
with by non-authorised personnel. Use only authorized Electrocompaniet service centers.
The contents of the carton
• 1 pc.
EMC 1 MKV Reference CD player
• 1 pc.
AC main cord
• 1 pc.
IR Remote control
• 2 pcs.
AAA Batteries for remote control
• 1 pc.
CD clamp
• 2 pcs.
Allen keys for securing of the Mechanical Cancellation System.
• 1 pc.
Owner's manual
• 1 pc.
Inspection card
Unpacking the EMC 1 MKV
Immediately upon receipt of the EMC 1 MKV CD player, inspect the carton for possible
damage during shipment. The carton and packaging have been designed to provide the
safest possible protection for transport of your EMC 1 MKV. Unpack the unit carefully.
Save all packaging materials for future shipment.

Important Notice

The transport screws must be removed for proper operation. When moving the CD player.
Always re-insert and tighten the transport screws to avoid severe damage to the unit!
For optimal sonic performance, the EMC 1 MKV should be burned in for a minimum time
of 72 hours. The easiest way to burn in your EMC 1 MKV is to put a disc in REPEAT mode
with the rest of your system turned off. In daily operation, switch off the CD player by using
the STANDBY button on the remote. If the CD player has been switched off, allow two
hours of warm-up to optimize sonic performance. Proper ventilation is important. Please
refer to page 4 for removal of the CD transport screws.
EMC 1_MKV.indd 3
3
21.11.2019 17:16:39