Ferm OTM1001 Original Instructions Manual page 4

MULTITOOL
OTM1001
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
SAfETy wArnIngS
1
WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions.
Failure to follow the safety warnings and
the instructions may result in electric
shock, fire and/or serious injury.
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
1
Read the user manual.
2
Risk of personal injury.
3
Risk of electric shock.
4
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
6
Risk of flying objects. Keep bystanders
away from the work area.
5
Wear safety goggles.
Wear hearing protection.
A
Wear a dust mask.
8
Do not dispose of the product in
unsuitable containers.
4
9
The product is in accordance with the
applicable safety standards in the
European directives.
Additional safety warnings for multitools
A
Contact with or inhalation of dust coming
free during use (e.g. lead-painted
surfaces, wood and metal) can endanger
your health and the health of bystanders.
Always wear appropriate protective
equipment, such as a dust mask. Always
use proper dust extraction during use.
● Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
● Do not work metal with a magnesium content
of more than 80%.
● Be very careful when working painted
surfaces.
● Do not use accessories which are not
specifically designed and recommended by
the manufacturer. Risk of personal injury.
● Inspect the machine and the accessories before
each use. Do not use accessories which are
bent, cracked, or otherwise damaged. If the
machine or one of the accessories is dropped,
inspect the machine or the accessory for
damage. If necessary, replace the accessory.
● Only use accessories that are recommended
by the manufacturer.
● Only use accessories that are suitable for the
application.
● Only use accessories with the correct
dimensions.
● Do not use accessories that require liquid
coolants. Risk of electric shock.
● Make sure that the accessories are properly
mounted. Do not use adapters or other aids to
mount accessories with another spindle
diameter.
● Make sure that the maximum speed for the
accessory is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
● Let the machine run at no load in a safe area
after mounting the accessories. If the machine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
● Make sure that the workpiece is properly
supported or fixed.