Yealink SIP-T23P User Manual page 54

User Guide for the SIP-T23P/G IP Phone
press Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select All Contacts and then press the Enter soft
key.
3. Press
4. Do one of the following:
- If only one number of the contact is stored in the local directory, press the Send
soft key to dial out the number.
- If multiple numbers of the contact are stored in the local directory, press the
Send soft key to display a list of numbers.
Press
Press the Send soft key to dial out the number.
To search for a contact in the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the
press Menu->Directory->Local Directory to enter the local directory.
2. Press the Search soft key.
3. Enter a few continuous characters of the contact name or continuous numbers of
the contact number (office, mobile or other number) using the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen. You can dial from the result list.
54
or to highlight the desired contact.
or to highlight the desired number.
refer to Directory
directory (
on page 46 ,
)