Yealink SIP-T23P User Manual page 48

User Guide for the SIP-T23P/G IP Phone
If Local Directory is removed from the
Menu->Directory->Local Directory to enter the local directory.
2. Press the AddGr soft key.
3. Enter the desired group name in the Name field.
4. Press
the Ring field.
If Auto is selected, this group will use the ring tone according to the priority: Contact
ring tone (refer to
Tones) >Phone ring tone (refer to
group will use the ring tone according to the priority: Contact ring tone (refer to
Adding Contacts) >Group ring tone.
5. Press the Add soft key to accept the change or the Back soft key to cancel.
You can also edit or delete any newly added contact groups.
To edit a group in the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the
press Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group.
48
or , or the Switch soft key to select the desired group ring tone from
Adding Contacts) >Account ring tone (refer to
refer to Directory
directory (
Ring Tones). If a specific ring tone is selected, this
refer to
directory (
on page 46 , press
)
Ring
Directory on page 46 ,
)