Advertisement
Item
Description
Host Interface
If you wish to select a dedicated interface
rather than having the printer automatically
detect the interface being used, select
parallel, serial, OKI HSP (appears only if
the print server is installed), or Opt. Card
(appears only if optional card is installed).
I/F Time Out
Sets the length of time the printer will
wait for additional data to be received
at the interface.
Impact Mode
Change to Quiet for minimum sound;
change to Hi-Impact Copy for forms
thicker than 7-part carbonless.
Intr Chr Sub St
International Character Sub Set: change
to Code page Only if you wish the
printer to ignore the Language Set.
I-Prime
Determines what the printer will do
when it receives the I-Prime signal from
the software: Buffer Print prints out the
buffer contents before resetting; Buffer
Clear dumps the buffer contents
immediately. Invalid causes the printer
to ignore the I-Prime command.
Language Set
Replaces certain standard symbols with
special characters used in foreign
languages.
LF Speed
Change to Slow if you wish to reduce the
speed with which the printer executes the
line feed command when using thicker
forms.
Line Spacing
Change to 8 lines per inch to get more
lines per page.
Op. Panel
Operator Panel Function: Change to
Function
Limited Operation to deactivate the
MENU, GROUP, ITEM, OPTION,
STORE and CONFIG buttons. This
prevents these from being changed from
the control panel when several people
are using the printer.
Page Length
Sets the length of the continuous forms
you are using.
Emulations Group(s)
All
Set-Up
All
Set-Up
All
Set-Up
Epson only
Set-Up
All
Parallel I/F
All
Symbol Sets
All
Set-Up
All
Rear Feed,
Front Feed
All
Set-Up
All
Rear Feed,
Front Feed
Advertisement
