Image Effects - Canon legria hv40 Instruction Manual

Adjusting the Picture: Exposure, Focus and Color
50
T
O SET THE CUSTOM WHITE BALANCE
1
Point the camcorder at a white
object, zoom in until it fills the
whole screen and press (
When the adjustment is completed
stops flashing and stays on. The
camcorder retains the custom setting
even if you turn off the camcorder.
2
Press
FUNC.
close the menu.
NOTES
When you select the custom white balance
[ SET]:
- Make the white balance adjustment in a place
with sufficient light.
- Set [D.ZOOM] to [
- Readjust the white balance if the lighting
conditions change.
- Very rarely and depending on the light source,
may keep on flashing instead of staying on.
Even in that case, the white balance would be
properly adjusted and the results should be
better than with [
Custom white balance may provide better
results in the following cases:
- Changing lighting conditions
- Close-ups
- Subjects in a single color (sky, sea or forest)
- Under mercury lamps and certain types of
fluorescent lights
Depending on the type of fluorescent light,
optimal color balance may not be obtained with
[ FLUORESCENT] or [
H]. If the color looks unnatural, adjust it using
[ AUTO] or [

Image Effects

You can use the image effects to change
the color saturation and contrast of your
recordings.
POINTS TO CHECK
Downloaded From VideoCamera-Manual.com Manuals
).
to save the setting and
OFF] ( 35).
AUTO].
FLUORESCENT
SET].
Mode switch:
Scene recording programs)
Options
[ IMAGE EFFECT OFF]
Records with no image enhancing effects.
[ VIVID]
Emphasizes the contrast and color
saturation.
[ NEUTRAL]
Tones down the contrast and color
saturation.
[ LOW SHARPENING]
Records subjects with softened outlines.
[ SOFT SKIN DETAIL]
Softens the details in the skin tone area for
a more complimentary appearance.
[ CUSTOM]
Allows you to adjust the brightness,
contrast, sharpness, and color depth of the
image.
[COL.DEPTH]: (–) Shallower colors,
[SHARPNESS]: (–) Vaguer outlines,
[CONTRAST]: (–) Flatter picture,
[BRIGHTN.]:
FUNC.
( 21)
FUNC.
FUNC.
* When you select [
press
FUNC.
procedure below.
( 8)
(except for the Special
(+) Richer color tonality
(+) Sharper outlines
(+) More defined light and
shade
(–) Darker picture,
(+) Brighter picture
Icon of the currently selected
Image Effect
Desired option*
CUSTOM], do not
and continue instead with the
Default value