Connecting To A Printer; Printing Still Images - Direct Print - Canon legria hv40 Instruction Manual

FUNC.
( 21)
FUNC.
: The image selection screen
appears.
F
ROM THE IMAGE SELECTION SCREEN
1
Select (
want to mark with a transfer order.
2
Press (
A checkmark
next to the transfer order symbol
Press (
transfer order.
3
Repeat steps 1-2 to mark additional
images with transfer orders or
press
FUNC.
menu.
Erasing All Transfer Orders
FUNC.
( 21)
FUNC.
CARD OPERATIONS
TRANS.ORD.ALL ERASE
YES
FUNC.
Downloaded From VideoCamera-Manual.com Manuals
TRANSFER ORDER
Press ( )
) the still image you
) to set the transfer order.
appears in the box
) again to cancel the
twice to close the
MENU

Connecting to a Printer

Connecting to a Printer
Printing Still Images – Direct Print
The camcorder can be connected to any
PictBridge compatible printer. You can mark
the still images you want to print and set the
desired number of copies as a print order
( 82).
Canon printers: SELPHY printers of the CP,
DS and ES series and inkjet printers marked
with the PictBridge logo.
Connecting the Camcorder to the Printer
.
1
Insert the memory card containing
the still images you want to print.
2
Turn on the printer.
3
Connect the camcorder to the
printer using the USB connection
–connection type
in the previous section PC
Connection Diagrams.
( 8)
• appears and changes to
• The
up and the current print settings will be
displayed for approx. 6 seconds.
IMPORTANT
If continues to flash (for more than 1
minute) or if
is not correctly connected to the printer. In such
case, disconnect the USB cable and turn off the
camcorder and the printer. After a short while,
turn them on again, set the camcorder to
mode and restore the connection.
NOTES
will appear for images that cannot be
printed.
Connecting to a Printer
( 75)– shown
1
(print/share) button lights
does not appear, the camcorder
79
( 8)
.