Hunter M3608-01 Instructions Manual page 9

Wiring (continued)
Using the orange
wire connectors
from the remote
control hardware
bag, connect the blue
wire from the receiver
to the blue wire (or
possibly black with
white stripe wire) from
the fan. Connect the
yellow wire from the
receiver to the black
wire from the fan.
Refer to CAUTION c.1 on pg. 2
Note: If you have a dual switch,
please cap the secondary power
wire from the ceiling. This will
result in one unused switch.
Using the orange wire
the
connect the black wire
(ungrounded) from
the ceiling to the black
wire from the receiver.
Connect the white
wire (grounded) from
the ceiling to both the
white wire from the
receiver and the white
wire from the fan.
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
9
M3608-01 • 05/09/16 • © 2016 Hunter Fan Company
www.HunterFan.com
connectors from
hardware bag,
the outlet box and the ungrounded wires on the other side of the outlet box.
1.888.830.1326
white