Table of Contents
Advertisement
Operation, Maintenance, & Cleaning
Medium
Speed
Fan
Off
Low
Speed
To turn on fan, press a fan speed button. Speeds
range from off (0) to high (3). Quickly press the
Light button to turn the lights off and on.
High
Speed
Light
To install the transmitter cradle, remove the
two screws holding the switch cover plate. Do
not remove the cover plate. Orient the cradle
by lining up the two mounting holes with
those on the cover plate. Insert and tighten
the screws. Do not over tighten.
Note: For rocker-style cover plates, break off
the tabs by pushing outward.
M3608-01 • 05/09/16 • © 2016 Hunter Fan Company
Switch Cover Plate
Removed Tabs
Rocker- Style Plate
16
www.HunterFan.com
1.888.830.1326
Safe-Exit
The Safe-Exit Program gives
you about thirty seconds of light
when you turn the lights off to
exit the room before the lights
go out. To use Safe-Exit:
• Press the Fan Off button for at
least three seconds to initiate the
Safe-Exit Mode.
• The lights will flash for visual
confirmation.
• The lights will stay on 50%
brightness for 15 seconds and
then begin to dim. After a total
of 30 seconds, the lights will be
completely off.
Advertisement
Table of Contents
