Table of Contents
Advertisement
Service Mode
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DIMMING
MORE...
Select with
or
then <ENTER>
<EXIT> to return.
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
UNIFORMITY
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
Select with
or
then <ENTER>
<EXIT> to return.
Identification
To display the Identification screen:
1
Push the cursor key é or ê to highlight 'Identification'.
2
Press ENTER to display the Identification screen.
The Identification screen gives an overview of :
- type of projector
- projector address
- software version
- installation configuration
- baud rate
- text ON
- projector serial number
- projector run time
- type of projector : BARCOREALITY 6400
- software version
- Proj. Address : to change the address of the projector, see Change
Projector Address in this chapter.
- Installation : possible installations :
* Front/Ceiling
* Front/Table
* Rear/Ceiling
* Rear/Table
To change the installation configuration follow the instructions in
chapter Installation Set Up.
- Baud rate : transfer speed for communication with an IBM PC (or
compatible) or MAC. The baud rate of the projector must be the same
as the baud rate of the connected computer. When there is a
difference, consult 'Change Baudrate PC' in this chapter.
- Projector Run Time : gives the total run time since the first start up.
All projectors leave the factory with a run time of approximately 24
hours.
- Projector Serial number : indicates the fabrication number of the
projector. This number can be useful when calling for technical
assistance.
11-2
Downloaded From projector-manual.com Barco Manuals
PANEL ADJUSTMENT
Select the
color temperature
PROJECTOR WHITE
6500
Select with
or
then <ENTER>
<EXIT> to return.
BARCO LOGO
STATUS : [ON]
DECODER
BACKGROUND : [ON]
INPUT SELECT
SHIFT
AUDIO
HOT KEY : [TEXT]
MOTOR DRIVER
LAMP DRIVER
LCD DRIVER
LCD DRIVER
LCD DRIVER
LCD DRIVER
Select with
or
<ENTER> to toggle/select
<EXIT> to return.
PRESET INPUT BALANCE
WHITE BALANCE
BLACK BALANCE
DEFAULT
Select with
or
then press ENTER
I2C DIAGNOSIS
D C A
12H # # #
16H # # #
18H # # #
74H # # #
78H # # #
C0H # # #
C4H # # #
C8H # # #
CCH # # #
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
5976069 BARCOREALITY 6400 21082000
UNIFORMITY
ADJUST
PURITY
DEFAULT
Select with
or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
LAMP DIMMING
MORE...
Select with
or
then <ENTER>
<EXIT> to return.
Advertisement
Table of Contents
