Table of Contents
Advertisement
Location and Functions of Control
13
FREEZ : press to freeze the projected image.
14
TEXT : when adjusting one of the image, e.g. controls during a meeting, the displayed bar scale can be removed by pressing
'TEXT' key first. To re-display the bar scale on the screen, press 'TEXT' key again.
15
ENTER : to start up the adjustment mode or to confirm an adjustment or selection in the adjustment mode.
16
Cursor Keys (on RCU) or '+' and '-' keys (cursor keys) on the local keypad : to make menu selections when in the adjustment
mode or to zoom/focus when the direct access is active.
Comparision between the cursor keys and the use of the '+' and '-' keys on the local keypad :
RCU
cursor key up
cursor key down
cursor key right
cursor key left
Use the '+' and '-' keys (cursor keys) : to increase or decrease the analog level of the image controls when they are first
selected.
17
EXIT : to leave the adjustment mode or to scroll upwards when in the adjustment mode.
18
RC operating indication : lights up when a button on the remote control is pressed. (This is a visual indicator to check the
operation of the remote control)
3-4
Downloaded From projector-manual.com Barco Manuals
=
local keypad
=
'+' key up
=
'-' key down
=
'+' key right
=
'-' key left
5976069 BARCOREALITY 6400 21082000
Advertisement
Table of Contents
