Mist Feature; Rear Wiper And Washer - Chrysler 2017 PACIFICA User Manual

O P E R A T I N G Y O U R V E H I C L E

Mist Feature

Use the Mist feature when weather conditions make occasional usage of the wipers necessary.
Push the lever upward to the Mist position and release for a single wiping cycle.
NOTE:
The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on
the windshield. The wash function must be used in order to spray the windshield with washer fluid.

Rear Wiper And Washer

Rear Windshield Wiper Operation
Rotate the windshield wiper lever center ring upwards to operate the rear window wiper as follows:
• In intermittent mode when the front window wiper is not operating.
• In continuous mode with reverse engaged.
With the windshield wipers on and reverse gear engaged, rear window wiping will be continuous
in the same way.
Rear Windshield Washer Operation
Pushing the windshield wiper lever forward activates the rear window washer. Keep the windshield
wiper lever pushed for more than quarter a second to activate the rear window wiper as well.
Releasing the windshield wiper lever will activate the smart washing function, as described for the
windshield wipers.
The function stops when the windshield wiper lever is released.
Rain Sensing Wipers — If Equipped
This feature senses moisture on the windshield and automatically activates the wipers for the
driver. This feature is especially useful for road splash or overspray from the windshield washers of
the vehicle ahead. Rotate the end of the multifunction lever to one of the four intermittent wiper
sensitivity settings to activate this feature.
The sensitivity of the system is adjustable from the multifunction lever. Wiper sensitivity position
3 has been calibrated for best overall wiping sensitivity. If the operator desires more wiping
sensitivity, they may select sensitivity positions 4. If the operator desires less wiping sensitivity,
they may select sensitivity positions 2 or 1. Place the multifunction lever in the OFF position when
not using the system.
NOTE:
• The Rain Sensing feature will not operate when the wiper speed is in the low or high position.
• The Rain Sensing feature may not function properly when ice or dried saltwater is present on
the windshield.
• Use of Rain-X or products containing wax or silicone may reduce rain sensor performance.
• The Rain Sensing feature can be turned on and off through the Uconnect System. Refer to
"Uconnect Settings" in "Multimedia" in the Owner's Manual on the DVD for further information.
63