Chrysler 2017 PACIFICA User Manual page 52

G E T T I N G S T A R T E D
5. Push down on the seat back to lock the seat in the tub.
6. Close the floor by pulling the floor panel backwards by the bottom corner edge of the panel.
7. Push down on floor panel to lock into place.
8. Readjust the front seat as needed.
Refer to "Stow 'n Go" in "Getting to Know Your Vehicle" in the Owner's Manual on the DVD for
additional information.
• The storage bin cover must be locked and flat to avoid damage from contact with the front
seat tracks, which have minimal clearance to the cover.
• Do not sit on the second row seat when it is in the stowed position with the seatback upright
otherwise damage to the seat may occur.
In a collision, serious injury could result if the seat storage bin covers are not properly latched:
• Do not drive the vehicle with the storage bin covers open.
• Keep the storage bin covers closed and latched while the vehicle is in motion.
• Do not use a storage bin latch as a tie down.
To Unstow Second Row Seats
For Manual Seats: To unstow the seat from the floor, move the front seat all the way forward
using the manual seat adjustment bar.
For Power Seats: Push the Stow 'n Go Assist button located on the B pillar trim (if equipped).
Refer to "Stow 'n Go Assist - If Equipped" in this section for instructions.
1. To access the storage bin, place the lock rod in the locked position.
NOTE:
• Push the lock rod inward for the locked position.
• Pull outward on the lock rod for the unlocked position.
2. Pull the latch located near the second row seat to open the floor panel.
3. Pull the floor panel and position it toward the front seats while folding the top half down and
rest it against the front seats.
4. Pull the strap located on the seat and pull the seat out of the storage bin. Push the seat
rearward making sure that it locks into the floor. Fold the seatback into the upright position
and pull the headrest up.
50
CAUTION!
WARNING!