Chrysler 2017 PACIFICA User Manual page 83

O P E R A T I N G Y O U R V E H I C L E
When the vehicle is shifted into REVERSE, the rear camera view & top view is the default view of
the system.
When the vehicle is shifted out of REVERSE (with camera delay turned ON), the camera image
will continue to be displayed for up to 10 seconds after shifting out of REVERSE unless the
vehicle speed exceeds 8 mph (13 km/h), the vehicle is shifted into PARK or the ignition is
switched to the OFF position.
When the vehicle is shifted out of REVERSE (with camera delay turned OFF), the surround view
camera mode is exited and the last known screen appears again. There is a touch screen button
(X) to disable the display of the camera image.
When enabled, active guide lines are overlaid on the image to illustrate the width of the vehicle,
including the side view mirrors and its projected backup path based on the steering wheel
position.
Different colored zones indicate the distance to the rear of the vehicle.
Modes of Operation
Additional camera modes can be selected when the vehicle is in any gear and the surround view
camera system is activated by pressing the soft key located in the "Controls" screen or the "Apps"
screen in the Uconnect system.
Top View
The Top view will show in the Uconnect System with Rear View and Front View in a split view
display. There is integrated ParkSense arcs in the image at the front and rear of the vehicle.
The arcs will change color from yellow to red corresponding the distance zones to the oncoming
object.
NOTE:
• Front tires will be in image when the tires are turned.
• Due to wide angle cameras in mirror, the image will appear distorted.
• Top view will show which sliding doors are open.
• Open Front doors will remove outside image.
Rear View
This is the Default view of the system in REVERSE and is paired with a Top view of the vehicle
with active guide lines for the projected path when enabled.
Rear Cross Path View
Pressing the Rear Cross Path soft key will give the driver a wider angle view of the rear camera
system. The Top view will be disabled when this is selected.
81