Chrysler 2017 PACIFICA User Manual page 123

USB Port
• Connect your compatible device using a USB cable into the USB Port. USB Memory sticks
with audio files can also be used. Audio from the device can be played on the vehicles sound
system while providing metadata (artist, track title, album, etc.) information on the radio
display.
• When connected, the compatible USB device can be controlled using the radio or Steering
Wheel Audio Controls to play, skip to the next or previous track, browse, and list the contents.
• The battery charges when plugged into the USB port (if supported by the specific device).
• To route the USB cable out of the center console, use the access cut out.
NOTE:
When connecting your device for the first time, the system may take several minutes to read your
music, depending on the number of files. For example, the system will take approximately five
minutes for every 1,000 songs loaded on the device. Also during the reading process, the Shuffle
and Browse functions will be disabled. This process is needed to ensure the full use of your
features and only happens the first time it is connected. After the first time, the reading process
of your device will take considerably less time unless changes are made or new songs are added
to the playlist.
Bluetooth Streaming Audio
• If equipped with Uconnect Voice Command, your Bluetooth-equipped device may also be
able to stream music to your vehicle's sound system. Your connected device must be
Bluetooth-compatible and paired with your system (see Uconnect Phone for pairing instruc-
tions). You can access the music from your connected Bluetooth device by pressing the
Bluetooth button on the touchscreen while in Media mode.
E L E C T R O N I C S
121