Table of Contents
Advertisement
Switch Housing
Align the screw holes in the switch
housing gasket in the motor housing.
Screw two switch housing assembly
screws from the
hardware bag halfway
into the motor housing. It does not matter
which two screw holes you choose.
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
14
M0035-01 • 05/28/13 • © Hunter Fan Company
www.HunterFan.com
Insert the third screw, found in
the
hardware bag, into place and then
tighten all three screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
1.888.830.1326
Advertisement
Table of Contents
