Energy Saving Mode; Setting Up The Appliance - Siemens TK76K573 Instruction Manual

de en

Energy saving mode

If the drip tray is not in place, the appli-
ance cannot be switched on and no water
flows out of the coffee outlet. The message
Replace drip tray
also appears if the drip tray is removed
while the appliance is in "energy saving
mode". The message disappears when the
drip tray is replaced. The appliance reverts
to "energy saving mode".
Do not press the power switch
while the appliance is operating.
The appliance should only be
switched off when it is in "energy
saving mode", so that it can rinse
automatically.

Setting up the appliance

1. Press the power switch (1).
1
2. The language selection is shown in the
display:
Sprache:
Deutsch
38
appears. This message
Start drücken
3. Press the retracted rotary knob
and turn it to select the language in
which you want the display texts to
appear. The following languages can be
selected:
Deutsch
English
Pycckий
Nederlands
Français
Italiano
Svenska
Español
Polski
4. Press start stop (8). The language
you selected is saved and the appliance
is in "energy saving mode".
You can change the language setting at
any time (see "Displaying settings").
5. Deploy the appliance (see "Deployment
system").
6. Remove the water tank (12) by pulling
it upward, rinse and fill it with fresh cold
water. Do not fill above the "max" mark.
12
7. Replace the water tank and push it
firmly downward into place.
Fill the water tank with fresh water
every day. The tank should always
contain sufficient water for operat-
ing the appliance.
8. Fill the bean container (15) with coffee
beans (for preparation using ground
coffee, see page 40).
9. Push the appliance back into the built-in
unit.
(4)
Português
Dansk
Norsk
Suomi
Česky
Türkçe
Magyar
Ελληνικά
Български
15