Limitation For 1027A-Z/X1027A-Z - Fujitsu SPARC Enterprise M3000 Product Notes

TABLE 4-1
Function
RCI
APCS
To use the RCI function, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers RCI Build Procedure and the SPARC
Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI User's Guide.
To use the APCS, see the Enhanced Support Facility User's Guide for Machine
Administration Automatic Power Control Function (Supplement Edition).

Limitation for 1027A-Z/X1027A-Z

For 1027A-Z/X1027A-Z, PCIe Dual 10 Gigabit Ethernet Fiber XFP cards, this
maximum limit apply:
No more than one card in an M3000 server.
■
Limitation for 4447A-Z/X4447A-Z
For PCIe Quad-port Gigabit Ethernet UTP Low Profile Adapter (4447A-Z/
X4447A-Z), this maximum limit apply:
No more than four cards in an M3000 server.
■
Patches for Emulex PCI Express (PCIe) Adapters
The following Emulex PCIe adapters require drivers supplied in patch 120222-26:
Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCIe HBA
■
(XSEFC402AF)
Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel PCIe HBA
■
(XSEFC401AF)
102 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
RCI and APCS Control with Mode Switch
Mode Switch
Locked
Remote power-on/power-off
operations are enabled.
Automatic power-on/power-off
operations are enabled.
Service
Remote power-on/power-off
operations are disabled.
Automatic power-on is disabled, but
power-off remains enabled.