Fujitsu SPARC Enterprise M3000 Product Notes page 78

Oracle Solaris OS Issues and Workarounds for All Supported Releases (Continued)
TABLE 3-4
M4000
CR ID M3000 M4000
6765239 O
7009469 O
7135497
18055846 O
62 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
M8000
M9000 Description
If a SAS device containing multiple
SAS targets is connected to the
onboard external SAS interface, it will
not work properly. The enumeration
of target IDs within the device may
change across reboots.
Creating a RAID configuration using
the raidctl(1M) command generates
a warning message on initial process.
Subsequent RAID configurations do
not.
O On systems with the RAID-capable
IOUA card and running Oracle Solaris
11, after a RAID volume is deleted
using raidctl -d , the format
utility does not display the disk.
O When adding a PCI Expansion Unit
by PCI hot plugging (PHP), Oracle
Solaris may panic by producing the
following message:
panic[cpuX]/thread=
XXXXXXXXXX: Fatal error has
occurred in: PCIe
fabric.(0xX)(0xXX).
Workaround
Use a FUJITSU SAS card
(SE0X7SA1F/SE0X7SA1X).
Alternatively, check for the
availability of a patch for this defect.
No workaround is available.
Execute cfgadm(1M):
cfgadm -c unconfigure cn where cn
is the controller number.
There is no effective workaround.
Do not hot plug a PCI Expansion
Unit. There is no problem in hot
replacing in respect to the same slot.