Fujitsu SPARC Enterprise M3000 Product Notes page 36

Known Issues and Workarounds in XCP 1121 (Continued)
TABLE 3-1
M4000
ID M3000 M5000
RTIF1- O
081016-002
RTIF1- O O
081225-001
RTIF1- O O
090108-003
RTIF1- O O
090427-005
RTIF1-
090731-001
RTIF1- O O
100331-002
RTIF1- O O
110222-001
20 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
M8000
M9000 Description
When FRUs are cold-replaced (with
the system off), (after poweron) the
monitor process might not generate
entries in the monitor message log
identifying the replacement operation
that has occurred.
O In the settimezone -c adddst
command, when you set eight or
more letters to the abbreviation of
time zone and the name of Daylight
Saving Time, execution of the
showlogs command induces a
segmentation fault and results in an
error.
O Date and time of the Last Update
which displayed on the XSCF Web
may not be updated.
O When you use the
setpasswordpolicy(8) command
and set "9999999999" (10 digits) in
Different Characters, the
showpasswordpolicy(8) command
displays "-1."
O While a DIMM correctable error (CE)
has been occurred, when XSCF
failover is started, a message "XSCFU
hang-up is detected" might
appear in the error log.
O When you start up a domain from a
disk that is connected to the 8 Gbps
fibre channel card (SE0X7F21F,
SE0X7F22F) and if it is unable to start
the domain due to causes such as disk
failure, an error log of "FRU:
/UNSPECIFIED" might be registered.
O If setpasswordpolicy -r is set to 0,
existing XSCF users are unable to
change their password and get the
error message, password:
Operation failed.
Workaround
No workaround is available.
Specify the abbreviation of time zone
and the name of Daylight Saving Time
in seven letters or less.
Please refresh the display.
No workaround is available.
Use XSCF Web.
This error log can be safely ignored.
No workaround is available.
Do not execute the command
"setpasswordpolicy -r 0".