Fujitsu SPARC Enterprise M3000 Product Notes page 84

Oracle Solaris OS Issues Fixed in Oracle Solaris 10 5/09 (Continued)
TABLE 3-8
M4000
CR ID M3000 M5000
6680733 O O
6689757 O O
6725885 O
68 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
M8000
M9000 Description
O Sun Quad-port Gigabit Ethernet
Adapter UTP (QGC) & Sun Dual 10
GigE Fiber XFP Low Profile Adapter
(XGF) NICs might panic under high
load conditions.
O Sun Dual 10 GigE Fiber XFP Low
Profile Adapter (XGF) with a single or
improperly installed XFP optical
transceivers might cause the following
error to show on the console:
The XFP optical transceiver
is broken or missing.
cfgadm will display non-existent
M3000 system boards (SB1 to SB15).
Workaround
This has been fixed in patch 139570-
01.
[Workaround]
If possible, use the card in x8 slot.
Otherwise, no workaround is
available.
This has been fixed in patch 139570-
01.
[Workaround]
Check and make sure that both XFP
optical transceivers are firmly seated
in the housing. Do not mix INTEL and
Sun XFP optical transceivers in the
same Adapter.
Do NOT plumb a port with the
ifconfig command if the port does not
contain an XFP optical transceiver or
it contains one but the transceiver is
not in use.
This has been fixed in patch 140401-
01.
[Workaround]
The cfgadm output for SB1-SB15 can
be ignored.